Sådan nulstilles dine ExpressVPN-routere til den originale firmware

[ware_item id=33][/ware_item]

This guide will show you how to reset your ExpressVPN router to the original firmware.


Before you start:  Make sure you have the original router firmware downloaded. You can find the firmware by visiting the website of the router’s manufacturer.

ExpressVPN router v2

Go to www.expressvpnrouter.com. In the sidebar, go to Advanced Settings > Software Update.

Click on

Click on Choose file and select the firmware file.

Click to select the firmware.

Click Update Now.

Click

Wait a moment while the firmware is upgrading. You will be taken back to the dashboard when the process has been completed.

ExpressVPN router v1

Linksys WRT1200AC, WRT1900AC, and WRT3200ACM

Go to www.expressvpnrouter.com using the router’s Wi-Fi connection. On the page, select System and then Backup / Flash Firmware.

system-flash

Scroll down to Flash new firmware image and uncheck the box next to Keep settings.

uncheck keep settings box

Click Choose File and upload the original Linksys firmware. You can find the original firmware file by visiting linksys.com and searching for your model name.

click choose file

Click Flash image… and then Proceed.

click on flash image

Note: If you are about to sell or give the router away, you are recommended to first flash the router a second time using the Linksys UI and then reset the router to factory defaults to wipe out any custom settings.

Linksys EA6200, Netgear R6300v2, Netgear R7000, Asus RT-AC68U, RT-AC87U, RT-AC56R, RT-AC56S, and RT-AC56U

Go to www.expressvpnrouter.com using the router’s Wi-Fi connection. On the page, select Administration and then Firmware Upgrade.

netgear administration

In the drop-down menu, select Reset to Default settings and find the original Asus or Netgear firmware to flash to.

select firmware

Click Upgrade and wait while the firmware is uploaded. You will be asked to verify the file flashing. Click Proceed to continue.

click proceed

When the flash is complete, you will be notified that you are not connected to the router. This is normal. Connect to the Asus or Netgear router’s Wi-Fi and set your router login information if prompted.

The image below displays the Netgear Admin Account Settings:

netgear credentials

You should have full internet access now. If you have trouble accessing your router dashboard later, see instructions on how to find your router’s default gateway.

Sådan nulstilles dine ExpressVPN-routere til den originale firmware
admin Author
Sorry! The Author has not filled his profile.